Showing posts with label RTD. Show all posts
Showing posts with label RTD. Show all posts

Tuesday, June 4, 2013

Improvements to the Panel Mount Connector

I haven't been happy with the 3-prong panel mount connector on my sous vide temperature controller which connected the RTD probe to the PID controller.  The connector had a spring-slide on it to keep it in place and I just didn't like the ergonomics of connecting and disconnecting it.

I then started building a replacement connector using a 2.5mm TRRS "headphone" style jack.  My goal with that was, in a pinch, be able to use the thermocouple probes from my iGrill and/or Maverick since they used 2.5mm TS style jacks.  At the end of the day, I just could not get the solder to hold well enough and had to switch to a 3.5mm TRS connector.

Now, the RTD probe has three wires to connect.  These headphone jacks, in any size, can have 2, 3, or 4 wire connections.  They are called, "tip", "ring" and "sleeve" connections in a nod to the old telephone switchboard days.  If there are three connections, it is "TRS" for Tip, Ring, Sleeve".  If there are four connections (like on your iPhone), they are "TRRS" for Tip, Ring, Ring, Sleeve.

And, again, I used 3.5mm TRS to hookup the RTP probe.


The Auber PID controller has 3 leads for input from the temp. probe and they are shown here facing the camera on the right.  Notice that I left the original leads going to the first connector and simply added 3 new leads going to the "headphone" jack.  This allows me to use either temperature probe.

The 3.5mm TRS connector is slicker, easier to connect and more-familiar to end-users.


Monday, March 4, 2013

Problems with the Panel Mount Connector

In Rodney Spark's design (which is still excellent), he used a 3-prong Panel Mount Connector to make the RTD probe and its 3 leads detachable.  This connector reminds me of the type of connector you would see backstage for heavy duty audio equipment.  It includes a built-in latch mechanism and was easy to solder, but gave me a problem during the Creme Brulee cook.

To be fair, the root cause of the problem was my inexperience in soldering.  I had unsheathed too much of the leads on the probe side of the connector and the bare leads were touching and not sending the correct signal.  I thought this was occurring on the side of the connector in the box, which was driving me mad.  The fix came with a bit of electrical tape wrapped around the exposed leads to insulate them and keep them apart.  Things are working fine now.

I do, however, plan to supplement this connector with 2.5mm tip-ring-ring-sleeve connector like you have on your iPhone.  This will also give me 3 leads (4 actually) and I'm thinking in a pinch I can also use the thermocouples from my Maverick or iGrill with a little creativity.